SURFACE MOUNTS
TM 750 Series
TM 750 Series
A= TM 750 (TM: Tubular Marker)
MTBF: Over 75 hits at 55 mph (Tested in a 4 ft model TM 754)
Height: 19” 24” 30” 36” 48”
Anchor: Surface
Weight: 3 lbs (approximate)
Colors: Red, White, Blue, Orange, Yellow, Green, Gray. Custom
colors available.
Sheeting: As per customer specifications
Though suitable as a multi-purpose traffic delineator, the TM 750 Series was specifically designed as a high performance/impact delineator for locations where traffic from side streets would be merging with traffic in a thoroughfare. The TM 750 Series is an impact-resistant tubular surface mounted post that has all the advantages of the internationally acclaimed Flexstake SM 700 Series, plus an enhanced 360 degree visibility.
The TM 750 Series may also be mounted on concrete or asphalt; alternatively, it may by mounted on our portable Flexstake Flatfoot.
The TM 750 Series delineator is a four-part assembly:
1. Post
2. Inner-core and hinge
3. Round base (8 inch)
4. Pin (pin can be quick release of straight)
Specifications
B= TM 750 CL (Tubular Marker: Center Line Base)
MTBF: 50 hits at 70 mph (Tested in a 4 ft. model TM 754)
Height: 19” 24” 30” 36” 48”
Weight: Approximately 3 lbs
Colors: Red, White, Blue, Orange, Yellow, Green, Gray.
Custom colors available.
Sheeting: As per customer specifications
This is the 750 TM with a narrower Center Line Base (4 1/2” x 12”)
The 750 TM CL Series delineator is a four-part assembly:
1. Post
2. Inner-core and hinge
3. Base: 4 1/2 inches wide by 12 inches long with FlexStake’s patented Mesh Base Technology
4. Pin (pin can be quick release or straight)
C= TM 750 RB B (Tubular Marker: Brad)
MTBF: 50 hits at 70 mph (tested in 3 ft model)
Height: 19” 24” 30” 36” 48”
Weight: 3 lbs (approximate)
Colors: Red, White, Blue, Orange, Yellow, Green, Gray.
Custom colors available.
Sheeting: As per customer specifications
This is the TM 750 with a brad to improve impact performance.
The 750 TM RB B Series delineator is a three-part assembly:
1. Post
2. Round base (8 inch)
3. Pin (pin can be quick release or straight)
D= TM 750 CL B (Tubular Marker, Center Line, Brad)
MTBF: 50 hits at 70 mph (tested in 3 ft model)
Height: 19” 24” 30” 36” 48”
Anchor: Surface Mount
Weight: 3 lbs (approximate)
Colors: Red, White, Blue, Orange, Yellow, Green, Gray.
Custom colors available.
Sheeting: As per customer specifications
This is the 750 TM with the narrower Center Line Base (4 1/2” x 12”) and a brad to improve impact performance.
The 750 TM CL B Series delineator is a three-part assembly:
1. Post
2. Base: 4 1/2 inches wide by 12 inches long with
Flexstake’s patented Mesh Base Technology
3. Pin (pin can be quick release or straight)
E= TM 750 RB FT (FT: Flat Top)
MTBF: Over 75 hits at 55 mph (Tested in a 4 ft model FT 754)
Height: 19” 24” 30” 36” 48”
Anchor: Surface Mount
Weight: 3 lbs (approximate)
Colors: Red, White, Blue, Orange, Yellow, Green, Gray.
Custom colors available.
Sheeting: As per customer specifications
This is the TM 750 with the top of the tube attened to three inches.
The TM 750 RB FT Series delineator is a four-part assembly:
1. Post
2, Inner-core and hinge
3. Round base (8 inch)
4. Pin (pin can be quick release or straight)
F= TM 750 FT CL (Flat Top: Center Line Base)
MTBF: Over 75 hits at 55 mph (Tested in a 4 ft model FT 754)
Height: 19” 24” 30” 36” 48”
Anchor: Surface Mount
Weight: 3 lbs (approximate)
Colors: Red, White, Blue, Orange, Yellow, Green, Gray.
Custom colors available.
Sheeting: As per customer specifications
This post is the TM 750 with the top of the tube attened to three inches and the narrower Center Line Base (4 1/2” x 12”).
The TM 750 FT CL Series delineator is a four-part assembly:
1. Post
2. Inner-core and hinge
3. Base: 4 1/2 inches wide by 12 inches long with Flexstake’s Mesh Base Technology
4. Pin (pin can be quick release or straight)
G= TM 750 FT RB B (Flat Top: Brad)
MTBF: 50 hits at 70 mph (tested in 3 ft model)
Height: 19” 24” 30” 36” 48”
Anchor: Surface Mount
Weight: 3 lbs (approximate)
Colors: Red, White, Blue, Orange, Yellow, Green, Gray and custom colors available.
Sheeting: As per customer specifications
This is the TM 750 with the top of the tube attened to three inches and a brad to improve impact performance.
The TM 750 FT RB B Series delineator is a three-part assembly:
1. Post
2. Round base (8 inch)
3. Pin (pin can be quick release or straight)
H= TM 750 FT CL B (Flat Top, Center Line, Brad)
MTBF: 50 hits at 70 mph (tested in 3 ft model)
Height: 19” 24” 30” 36” 48”
Anchor: Surface Mount
Weight: 3 lbs (approximate)
Colors: Red, White, Blue, Orange, Yellow, Green, Gray. Custom colors available.
Sheeting: As per customer specifications
This is the TM 750 with the top of the tube attended to three inches, the narrower Center Line Base (4” x 12”), and a brad to improve impact performance.
The TM 750 FT CL B Series delineator is a three-part assembly:
1. Post
2. Base: 4 inches wide by 12 inches long with Flexstake’s
patented Mesh Base Technology
3. Pin (pin can be quick release or straight)
Tested to meet the following specifications:
TM 750 B: 50 impacts at 70 mph.
Our Products are tested to meet and existing DOT specification through a certified test.
Be advised that most of our products will perform better than the certified test.